Block LCB-05-LED
LCB-05-LED unit is designed to control LED lighting in livestock buildings on schedule (automatic) and manual modes.
Specifications LCB-05-LED:
- Lighting control from the built-in time relay
- Lighting controlled by an external control signals 0-10V (0-5V)
- Manual control
- Intuitive graphical user interface
- The relative brightness of fixtures is displayed on the indicator ranging from 1% to 100% in increments of 1%; if the lights turned off, indicated by 0%
- Built-in time relay control unit provides a reference to 16 daily programs, each with a daily program of up to 16 step change in the level of illumination
- Full time of sunrise and sunset modes is defined separately in the range from 0 to 30 minutes in 1 second increments
- Out – the pulse-modulated voltage to control brightness
- fixtures
- brightness control for three channels
- ability to directly activate light at full brightness
- switching power circuits in a predetermined sequence
- the power consumed from the AC 220 V 50 Hz does not exceed 20W (excluding switched loads)
- control unit weight of no more than 6 kg
- control unit dimensions less than 500 × 410 × 130 mm (height width depth)
- resistance to moisture and dust IP65
Block LCB-06-LED
LCB-06-LED unit is designed to control LED lighting in livestock buildings on schedule basis (controlled by an external computer) and in manual mode.
Specifications LCB-06-LED:
- lighting control from an external time switch
- lighting controlled by an external 0-10V control signals (0-5V) manual control
- the relative brightness of fixtures is displayed on the indicator ranging from 1% to 100% in increments of 1%; if the lights turned off, indicated by 0%
- built-in function “sunrise / sunset”
- out – the pulse-modulated voltage to control brightness fixtures
- switching power circuits in a predetermined sequence
- ability to directly activate light at full brightness
- the power consumed from the AC 220 V 50 Hz does not exceed 10 W (excluding switched loads)
- control unit weighs less than 3 kg
- the overall dimensions of the control unit is not more than 300 × 210 × 130 mm (width height depth)
- resistance to moisture and dust IP65
The converter LCB-06-kit
The converter LCB-06-kit is used in conjunction with cupboards of PB series and is designed for control in both manual or automatic modes, and controlling the brightness of LED lights. Converter is designed as a card installed in the electrical switchboard on a DIN-rail.
Specifications LCB-06-kit:
- lighting control from an external time switch
- lighting controlled by an external 0-10V (0-5V) control signals
- manual control from an external variable resistor
- built-in function “sunrise / sunset”
- management of external electric starter
- power consumption AC 220 V 50 Hz does not exceed 5 W
- unit weight of no more than 0.15 kg
- dimensions not exceeding 110 × 70 × 45 mm (width / height / depth)